2.01 RAILING SYSTEM Specifier Note: Alternative material handrails are bing popular choices for architects and builders on residential and lightmercial projects of many types. Alternative material railing products are intended to provide safe, decorative and low mainteceponents for use as a railing on steps, porches and decks. Melton Classics’ vinyl andposite products will not rot, rust, chip, flake or corrode. They are low maintece and will withstuding temperature changes and intense ultraviolet light A. ACCEPTABLE MA P.O. Box 465020 Lawrenceville, GA 3-3060 Phone Fax
[email protected] Specifier Note: Melton Classics’ vinyl products are manufactured from 100% new vinyl. The base ingredient is rigid PVC (polyvinyl chloride) homopolymerpound with a high level of titanium dioxide pigment for long-term UV resistance and impact modifiers fo... See full list on Related Materials:Refer to other sections listed in Related Sections Paragraph herein for related materials. Adhesive, Grout and Anchor Cement: Adhesive:PVC based adhesive with the same UV railing system. Nonshrink, Nonmetallic Grout:Premixed, factory packaged, nonstaining, noncorrosive, nongaseous groutplying with CE CRD-C-621. Provide grout specifically rmended by manufacturer for exterior applications of type specified in this section. Products:Subject topliance with requirements, provide 1 of the following: “Euco N-S Grout” Euclid Chemical Co. “Sealtig “Sonogrout” Sonneborn Bui “Five Star Grout” U., Melville. NY. 2.06 FABRICATION General:All Railing Kitse pre-fabriude specified rails, specified balusters, rail inserts, mounting brackets, attachment hardware for standard installations and inst... See full list on 3.01 MANUFACTURER’S INSTRUCTIONS Compliance:Comply withuding product technical bulletins, product catalog installation instructions and product carton instructions for installation. 3.02 EXAMINATION Site Verification of Conditions:Verify substrate conditions, which have been previously installed under other sections, are acceptable for product installation in accordance with manufacturer’s instructions. 3.03 PREPARATION Surface Preparation:[Specify applicable product preparation requirements.]. 3.04 INSTALLATION Railing System Installation: Ensure mounting surface and substructure are structurally capable of supporting railing system and application loads. Install guardrail in application shown inpliance with manufacturer’s written instructions. During installation,ponents shall be carefully handled and stored to avoid contact with abrasive surfaces. Installponents in sequence rmended by the manufacturer. Install guardrail or handrai... See full list on
Get Price